for «ТОR-D» bulletproof helmet (BSP "BLOCK")
PURPOSE
Designed to increase the area of protection of high cut ballistic helmets, provides additional protection in the ears and neck area from injuries caused by the destruction of shells, mines, hand grenades and bladed weapons.
The Compliance: Protection against damage by debris simulators with a typical mass of 1.1 g and a speed of 620-650 m/s from a distance of 5-10 m. (Element of defeat is the simulator A3 / 6723 according to the Annex to STANAG 2920).
SPECIFICATIONS
Dimensions (not more than):
-
Length - 160 mm;
-
Width -140 mm;
-
Depth - 40 mm.
The total area of protection (not less than): 150 cm2 (75 cm2 on each side).
The weight of the kit (including fastening elements): 350 +/- 30 g.
The construction of the BSP:
The protective layer of the BSP is made of aramid fabric by the molding-pressing method.
The design of the BSP provides convenience and reliability of its installation on the helmet, ease of operation with the helmet.
It is made in two versions:
-
Volumetric (BSP-V), which allows the use of a radio headset;
-
Flat (BSP-F), which does not allow the use of a radio headset.
The BSP is mounted on the helmet side rails with fastening elements without using special tools.
The basic color is FS 20150 Coyote 476/498, other colors are available at the request of the customer.
The outer surface of the ballistic shields of the BSP is smooth, matt and has an anti-reflective coating.
The BSP provides operation and preserves protective properties in the temperature range from -50 degrees of Celsium to + 60 degrees of Celsium.
EQUIPMENT SET:
-
left and right side ballistic plates;
-
fastening elements;
-
product list;
-
packing.